Gold Earrings

Gold Earrings by Format & Design

Earrings across the catalogue, gathered by format rather than by metal colour or karat, both of which the individual listing states. Studs, hoops, huggies, drops, dangles, climbers and jackets each measure and describe themselves differently, and this page explains how to read those descriptions before you choose between the categories beneath it. The formats differ in how they attach as well as in how they look, and the fitting is the specification that decides most.

Formats, Measurements and Where They Sit

Earrings are the category where a listing is easiest to misread, because the same number can mean four different things and the same word can describe two different objects. This section sets out what each measurement refers to, how the formats relate to one another, how earrings sit with the rest of a collection, and how to keep pairs together.

What the millimetre figure measures on each format

On a hoop the figure is the outside diameter of the ring, measured across the widest point. On a stud it describes the front, meaning either the stone or the decorative face, and not the post behind it. On a drop it is the overall length from the top of the fitting to the bottom of the design, which includes the fitting itself. Where a pair of figures is given, they are width and height for a shaped front and diameter and gauge for a hoop.

Reading the rest of an earring listing

Beyond the dimensions, three fields decide whether an earring will work. The fitting tells you how it attaches and therefore which piercing it suits. The quantity tells you whether the listing describes a pair or a single, which matters most among cartilage and climber designs where singles are common. The metal colour and karat tell you whether the piece will agree with what is already worn in the same ear.

The formats as a map

Studs sit flat on the lobe and read as a point. Hoops enclose the lobe and read as a line. Huggies are hoops at short diameter, sitting tight against the ear. Drops and dangles suspend a form below the fitting so that it swings. Climbers run up the edge of the ear rather than hanging from it. Jackets sit behind the lobe with a separate stud through them, giving one piercing two elements. Each behaves differently in movement and in profile.

Wearing earrings with a pendant or a ring

What has to agree between earrings and another piece is narrower than people assume. Metal colour is the element the eye checks first and the one worth getting right. Scale is second, in that a substantial pendant is unbalanced by very small earrings and the reverse is equally true. Shape and stone need not repeat at all; a deliberate variation on a theme generally looks more considered than an exact echo of it.

Lobe, second and cartilage placements

The lobe is soft tissue and carries weight comfortably, which is why the heavier formats live there. A second piercing sits above the first with limited space between them, so designs that project outward interfere with the earring below. Cartilage sits in the firm upper edge of the ear, where the tissue does not stretch and the curve is tight; the formats that suit it are close-sitting ones such as small hoops, huggies and flat studs.

Storage and travel

Earrings are the pieces most often lost, and almost always singly. The habits that prevent it are unglamorous: fasten backs onto posts before putting a pair away rather than storing the two components separately, keep pairs in a divided box rather than loose in a dish, and remove earrings over a closed surface rather than a basin. For travel, a compartmented case or a small zip pouch per pair is the difference between arriving with two earrings and arriving with one.

Reading an Earring Listing

What does a millimetre measurement on an earring listing refer to?

It depends on the format. On a hoop it is the outside diameter of the circle, measured across the widest point.

On a stud it describes the front of the earring, meaning the stone or the decorative face, and not the post behind it.

On a drop or a dangle it is the overall length from the top of the fitting down to the lowest point of the design.

Does the millimetre figure mean the same thing on every earring format?

No, and that is the most common source of confusion. The same number describes a diameter on one format and a total length on another.

Where two figures appear they are usually width and height for a shaped front, or diameter and gauge for a hoop.

The reliable check is to hold a millimetre rule against the ear before ordering, which settles the question far better than comparing photographs.

What should I check on an earring listing before ordering?

The fitting, first, because it decides whether the design will work with the piercing it is intended for and is the hardest thing to change afterwards.

Then the dimensions, and specifically what the figures are measuring, since the convention changes between formats and the same number can describe two very different objects.

Then the metal colour and karat, which decide whether the piece will sit comfortably beside anything already worn in the same ear.

What are the main earring formats called?

Studs sit flat against the lobe; hoops pass through it and return; huggies are hoops at short diameter that sit close to the ear.

Drops and dangles suspend a form below the fitting so that it moves, and climbers run upward along the edge of the ear instead of hanging.

Jackets sit behind the lobe with a separate stud passing through them, which turns a single piercing into a two-part design.

What should align when earrings are worn with a pendant?

Metal colour, above everything else. It is the first thing the eye compares and the only element that looks wrong when it is slightly off rather than clearly different.

Scale is the second. A substantial pendant is unbalanced by very small earrings, and small earrings look accidental beside a large one.

Shape and stone do not need to repeat. A variation on a theme usually reads as more considered than an exact echo does.

Should earrings match a ring exactly?

They rarely need to. A ring and a pair of earrings are seen at different distances and almost never in the same glance, so exact repetition is wasted effort.

Metal colour is again the element worth aligning, since it is what registers across a room when nothing else about either piece is legible at that distance.

Where a set has been designed together the pieces will match by intention, and that is a different proposition from assembling a match from separate purchases.

What suits a cartilage piercing?

Close-sitting designs. The upper ear is firm tissue with a tight curve, so anything that projects outward catches on hair, headwear and pillows.

Small hoops, huggies and flat studs are the formats that work with that geometry rather than against it, because they follow the curve instead of standing away from it.

Length is the other constraint. A design that hangs will swing against the edge of the ear rather than clear of it, which is uncomfortable over a long day.

Can one earring be worn in a second lobe piercing?

Often, yes, and single listings exist precisely for this purpose. The constraint is usually available space rather than the fitting itself, which is the same in both holes.

A second piercing sits close above the first, so a design that projects outward or hangs will interfere with whatever is in the lobe below it.

Flat, close-sitting designs solve that, which is why so many second-hole earrings are small studs or short huggies rather than anything with length.

How should I store earrings so pairs stay together?

Fasten the back onto the post before putting a pair away. Separated components are how most single earrings begin their disappearance.

Use a divided box or a card with holes rather than a shared dish, so that each pair occupies its own compartment.

Take earrings out over a closed surface rather than over a basin, since a dropped back finds a drain with remarkable reliability.

How do I travel with earrings without losing one?

Give each pair its own container. A compartmented case, a small zip pouch or even a buttoned card keeps the two halves together through handling.

Pack them in hand luggage rather than in a case that will be moved by other people, and put them away as soon as they come off rather than at the end of the evening.

If a piece has a fitting that works loose, deal with it before travelling rather than after, since a hotel carpet is an unforgiving place to notice.