Frete grátis para todos os pedidos acima de US$ 75 nos Estados Unidos

Quando se trata de ouro, garantimos a utilização de ouro 100% verdadeiro em todos os nossos produtos de ouro.

Italian real gold chains in 10K and 14K, karat-stamped

Corrente de ouro

Corrente de ouro
Ver como

Choosing a Gold Chain

What is the difference between figaro, rope and cuban chains?

Figaro alternates a longer link with two or three shorter ones, giving a rhythmic pattern and a chain that flexes readily.

Rope is built from segments twisted around a central axis, so it reads as a spiral and catches light from every angle. It is dense for its width.

Cuban and curb links are flattened so they lie against the skin rather than rolling, which makes them read heavier and more solid than an open link of similar weight.

What width chain should I choose?

One to three millimetres is a fine chain - it disappears under a collar and is the right choice for carrying a small pendant without competing with it.

Three to six millimetres reads as a chain in its own right and can be worn alone while still carrying a substantial pendant.

Above six millimetres the chain becomes the piece. Bear in mind that the chain also has to be proportionate to any pendant it carries.

What is the difference between a solid and a hollow gold chain?

A solid chain has links made from solid wire. A hollow chain has links formed from tube, so it reaches the same outside dimensions with substantially less gold.

That is why two chains that look alike can differ considerably in price - gold is sold by weight, and in a chain the weight is essentially the piece.

Hollow construction is what makes a wide chain wearable and affordable. The trade-off is that a hollow link crushes or kinks under a sharp pull where a solid one resists.

Can a broken gold chain be repaired?

A solid chain, almost always. A jeweller opens the failed link, rejoins and solders it, and the repair is essentially invisible.

A hollow chain is harder. The link is a thin shell, so heating it to solder risks collapsing or burning through the tube - repairs are more expensive, more visible, and some breaks are not economically repairable.

If you want a chain that can be fixed and kept for decades, that is the strongest argument for solid construction.

What length chain should I buy?

Sixteen inches sits at the base of the neck. Eighteen inches is the most common adult length and lands at or just below the collarbone.

Twenty inches drops onto the chest and suits a higher neckline; twenty-four and beyond sits over clothing and is more common on heavier chains worn alone.

The most reliable method is to measure a chain the wearer already wears often, since that length reflects a preference already tested in practice.

What does diamond-cut mean on a chain?

It refers to the finish, not to any diamonds. Small facets are cut into the surface of the links so that they catch and throw light along the length of the chain.

The effect is a noticeably brighter, more sparkling chain without any change in weight or construction.

It is a machining process applied to the gold itself, so it does not wear off the way a plated finish would.

Where do chains usually break?

Almost never in the middle. Chains fail at the clasp, at the jump ring beside it, or where a pendant bail rubs against the links - the points where load concentrates.

Glancing at those two or three places when you clean the chain catches most problems while they are still a quick, inexpensive repair.

A very fine chain under a heavy pendant puts real stress on exactly those points, which is why proportion matters structurally and not just visually.

Will a gold chain tarnish?

Gold itself does not tarnish, but the alloy metals mixed with it can react over time, and a chain has more surface area than almost any other piece.

It usually shows as a gradual dulling rather than blackening, and it is the result of contact with cosmetics, perspiration, chlorine and cleaning products.

Washing a chain occasionally in warm soapy water and taking it off before swimming prevents almost all of it.

How do I stop a chain from tangling?

Fasten the clasp before putting it away and lay the chain flat rather than dropping it into a box. That alone prevents most tangling.

Store chains separately from one another - a pouch or a lined compartment each - since chains stored together are what actually knot.

A knotted fine chain is the most common avoidable damage to any necklace, and working a knot out roughly is how a chain gets stretched.

How should I clean a gold chain?

Warm water, a little mild soap and a soft brush, working along the length so the bristles get between the links where residue collects.

Rinse thoroughly and dry completely - water sits between links and inside hollow ones longer than you would expect.

Take the chain off before swimming and cleaning, since chlorine and household chemicals are harder on gold alloys than ordinary wear is.

About Real Gold Chains

Link Style, Width and Construction in a Gold Chain

The karat stamp on a gold chain is a legal guarantee of its gold content — enforced by the FTC in the United States and by equivalent standards bodies internationally. 10K means the metal is 41.7% pure gold; 14K means 58.5%; 18K means 75%. The remaining percentage in each case is alloy metal — copper, silver, zinc, or palladium — added to increase hardness, adjust color, and make the gold practical for jewelry manufacturing. A stamp of '14K' means every link in the chain meets this standard, not just the surface.

Gold plating deposits a thin gold layer — typically 0.5 to 2.5 microns — over a base metal core such as brass or copper. That layer wears at the points of highest friction: the back of the chain where it contacts the neck, the clasp, and any area that rubs against clothing or skin. A quality gold-plated piece may last one to five years before the base metal shows through; a heavily worn plated piece may show wear within months. Karat gold wears too — but what wears away is gold, not a coating over something else. The piece remains gold throughout its life.

For a real gold chain, construction quality works alongside karat to determine longevity. The link geometry, wall thickness, solder joints, and clasp mechanism determine how the chain holds up under daily stress. Italian chain manufacturing has been optimizing these variables for generations — the production techniques for gold chain in Italy's jewelry-producing regions (Arezzo, Valenza, Vicenza) represent accumulated expertise that translates into chains that hold their construction integrity over decades of wear.

Comparar /3

A carregar...