Envío gratis en todos los pedidos superiores a $75 en los Estados Unidos

Cuando se trata de oro, garantizamos el uso de oro 100% real en todos nuestros productos de oro.

Pendientes

Pendientes
Ver como

Reading an Earring Listing

What does a millimetre measurement on an earring listing refer to?

It depends on the format. On a hoop it is the outside diameter of the circle, measured across the widest point.

On a stud it describes the front of the earring, meaning the stone or the decorative face, and not the post behind it.

On a drop or a dangle it is the overall length from the top of the fitting down to the lowest point of the design.

Does the millimetre figure mean the same thing on every earring format?

No, and that is the most common source of confusion. The same number describes a diameter on one format and a total length on another.

Where two figures appear they are usually width and height for a shaped front, or diameter and gauge for a hoop.

The reliable check is to hold a millimetre rule against the ear before ordering, which settles the question far better than comparing photographs.

What should I check on an earring listing before ordering?

The fitting, first, because it decides whether the design will work with the piercing it is intended for and is the hardest thing to change afterwards.

Then the dimensions, and specifically what the figures are measuring, since the convention changes between formats and the same number can describe two very different objects.

Then the metal colour and karat, which decide whether the piece will sit comfortably beside anything already worn in the same ear.

What are the main earring formats called?

Studs sit flat against the lobe; hoops pass through it and return; huggies are hoops at short diameter that sit close to the ear.

Drops and dangles suspend a form below the fitting so that it moves, and climbers run upward along the edge of the ear instead of hanging.

Jackets sit behind the lobe with a separate stud passing through them, which turns a single piercing into a two-part design.

What should align when earrings are worn with a pendant?

Metal colour, above everything else. It is the first thing the eye compares and the only element that looks wrong when it is slightly off rather than clearly different.

Scale is the second. A substantial pendant is unbalanced by very small earrings, and small earrings look accidental beside a large one.

Shape and stone do not need to repeat. A variation on a theme usually reads as more considered than an exact echo does.

Should earrings match a ring exactly?

They rarely need to. A ring and a pair of earrings are seen at different distances and almost never in the same glance, so exact repetition is wasted effort.

Metal colour is again the element worth aligning, since it is what registers across a room when nothing else about either piece is legible at that distance.

Where a set has been designed together the pieces will match by intention, and that is a different proposition from assembling a match from separate purchases.

What suits a cartilage piercing?

Close-sitting designs. The upper ear is firm tissue with a tight curve, so anything that projects outward catches on hair, headwear and pillows.

Small hoops, huggies and flat studs are the formats that work with that geometry rather than against it, because they follow the curve instead of standing away from it.

Length is the other constraint. A design that hangs will swing against the edge of the ear rather than clear of it, which is uncomfortable over a long day.

Can one earring be worn in a second lobe piercing?

Often, yes, and single listings exist precisely for this purpose. The constraint is usually available space rather than the fitting itself, which is the same in both holes.

A second piercing sits close above the first, so a design that projects outward or hangs will interfere with whatever is in the lobe below it.

Flat, close-sitting designs solve that, which is why so many second-hole earrings are small studs or short huggies rather than anything with length.

How should I store earrings so pairs stay together?

Fasten the back onto the post before putting a pair away. Separated components are how most single earrings begin their disappearance.

Use a divided box or a card with holes rather than a shared dish, so that each pair occupies its own compartment.

Take earrings out over a closed surface rather than over a basin, since a dropped back finds a drain with remarkable reliability.

How do I travel with earrings without losing one?

Give each pair its own container. A compartmented case, a small zip pouch or even a buttoned card keeps the two halves together through handling.

Pack them in hand luggage rather than in a case that will be moved by other people, and put them away as soon as they come off rather than at the end of the evening.

If a piece has a fitting that works loose, deal with it before travelling rather than after, since a hotel carpet is an unforgiving place to notice.

About Gold Earrings

Formats, Measurements and Where They Sit

Earrings are the only jewelry that makes direct, prolonged contact with sensitive skin — the earlobe and the area directly around a piercing. This is why metal choice matters more for earrings than for any other piece. Base metals used in plated earrings — typically brass or copper — oxidize when in contact with skin moisture and can cause reactions at the piercing site. The gold coating wears away fastest at the post, which is exactly where it contacts the piercing. Genuine 10K or 14K gold is biocompatible and doesn't oxidize under normal wear.

The mechanics of hoop earrings are worth understanding when choosing between styles. Hinged hoop earrings — where the hoop opens at a hinge point — are more secure and easier to put on than tube hoops, where the post inserts into a hollow tube. For larger, heavier hoops, the hinge design is significantly more reliable for daily wear. Small hoops in the 10–15mm range work well in either construction; larger hoops above 25mm are better served by a hinged design.

Drop earrings require attention to post gauge. A thicker post distributes the earring's weight across more of the piercing, which is more comfortable for extended wear. Very thin posts on heavier drops can cause the earring to pull the piercing downward over time. For earrings worn for long periods, post thickness matters as much as the design.

Comparar /3

Cargando...