BLACK FRIDAY: Save up to $1,500 – Applied Automatically at Checkout

Genuine karat gold — never plated, gold-filled, or overlaid.

Green beryl, natural and lab-grown

Emerald Jewelry

Emerald jewelry.

Shop by Stone Origin, Setting & Metal

Every piece in this collection is set with a real emerald - natural or lab-grown, never an emerald-cut colourless stone. The assortment runs across rings, necklaces, earrings, pendants, bracelets and anniversary bands, in 14K gold and platinum, with round, oval, pear, baguette and cabochon stones held in bezel, halo, solitaire and stackable settings. Filter by stone origin, metal, jewellery type and setting to narrow the selection, and check each product listing for the stone size, carat weight and metal colour of that specific piece.

View as

How to Judge an Emerald: Colour, Clarity, Cut and Setting

Emerald is graded on a different footing from diamond, and the habits that serve a diamond shopper can mislead here. This guide covers what actually drives an emerald's appearance and price, how to read a listing, and which settings suit which kind of wear.

Common Questions About Buying Emerald

Why do natural emeralds have visible inclusions?

Inclusions are a normal feature of natural emerald rather than a flaw in a particular stone. Emerald crystallises in geologically turbulent conditions, and the result is a stone that typically contains fissures, growth tubes and mineral inclusions. The trade calls the pattern the jardin, from the French for garden, and gemologists use it to tell one stone from another.

This is why emerald is not judged against diamond clarity standards. An eye-visible jardin is expected in natural emerald, and a natural stone with no visible internal features at all is unusual. Colour, not clarity, is what principally drives an emerald's appearance and price.

Lab-grown emerald is grown in a controlled environment rather than in the ground, and it is sold here as genuine emerald. Inclusion patterns still vary from stone to stone in both categories, so judge a particular stone from its own listing photographs rather than from its origin label. Each listing states which origin a piece uses.

How should I clean and care for emerald jewelry?

Use lukewarm water with a little mild soap, work gently around the setting with a soft brush, rinse thoroughly and dry with a soft cloth. Do not use an ultrasonic or steam cleaner on emerald. Both can disturb the fissures inclusions leave in a natural stone, and both can affect any oil or resin filling that has been used to improve apparent clarity.

Keep emerald away from solvents and household cleaning products, and take emerald rings off for manual work and anything involving knocks. Emerald sits at 7.5 to 8 on the Mohs scale, so it holds up well against scratching, but its resistance to chipping is lower than that figure suggests.

Store emerald pieces on their own rather than loose with other jewellery, so nothing harder rests against them. Looked after this way, an emerald piece stays in good condition through ordinary wear, and a jeweller can check and tighten the setting periodically.

What is the difference between a natural and a lab-grown emerald?

Both are emerald: beryl coloured green by chromium or vanadium, with the same chemistry, the same crystal structure and the same optical properties. Neither is an imitation, and neither is glass or a coloured substitute. The difference is where the crystal grew - in the ground over geological time, or in a controlled environment over a much shorter one.

In practice the differences that matter to a buyer are clarity and colour, and both vary from stone to stone within either category rather than following from the origin alone. Natural emerald carries the jardin and the colour variation that comes of having formed in the earth, and that individuality is what many buyers are specifically after. Judge a specific stone from its own listing.

This collection carries both in roughly equal measure - 560 natural designs and 563 lab-grown - and origin is stated on every listing. Which to choose is a question of what you value rather than of quality: neither is a lesser stone.

What should I look for in an emerald's color?

Look at three things together. Hue is how pure the green is and whether it leans toward blue or toward yellow. Saturation is how intense the colour is. Tone is how light or dark the stone reads. The combination the trade values most highly is a strongly saturated green, often with a slightly bluish cast, at a medium tone.

The two directions to watch are pale and dark. A stone low in saturation reads greyish or washed out. A stone very dark in tone stops light moving through it and loses life even though its colour is technically deep. Between those, personal preference reasonably takes over.

There is no industry-wide letter scale for emerald colour of the kind that exists for diamond, so listings describe the stone rather than grade it. Judge from the photographs, note the stated stone dimensions, and remember that lighting changes how green reads - daylight and warm indoor light will not show the same stone the same way.

Are emeralds treated, and does treatment matter?

Filling surface-reaching fissures with oil or resin is a long-standing and widely accepted practice in the emerald trade. It reduces the visibility of fissures that reach the surface and so improves apparent clarity. The extent of filling varies from stone to stone and does affect value.

It matters in two ways. Value, because a stone needing little enhancement generally sits higher than a heavily filled one of the same colour and size. And care, because a filled stone must be kept away from heat, solvents and ultrasonic cleaning, which can disturb the filler over time.

Treatment status is a property of an individual stone rather than of a collection, so it is not something a category page can state on behalf of every piece. If it is material to your decision, confirm it for the specific design before ordering.

Which setting protects an emerald best?

A bezel setting gives the most protection. A rim of metal surrounds the girdle of the stone - the edge where chips are most likely to start - so the vulnerable perimeter is covered rather than exposed. For a ring worn every day, or on a hand that works, a bezel is the more forgiving choice. This collection has 204 bezel designs.

Prong and solitaire settings hold the stone at points and leave the sides open. They show more of the stone and let more light reach it, which is why they are chosen when the emerald itself is the whole point of the piece. They ask for a little more awareness in wear. A halo, of which there are 173 designs here, sits between the two: the surrounding accent stones raise the visual size of the centre and give the girdle some shelter.

The piece type matters at least as much as the setting. Earrings, pendants and necklaces take far less impact than rings do, so an emerald that calls for thought as an everyday ring is an uncomplicated choice as a pendant.

Can I wear an emerald ring every day?

Many people do, and the question is really about which emerald ring rather than whether. Emerald resists surface scratching well at 7.5 to 8 on the Mohs scale. What it resists less well is a sharp knock, because the inclusions in a natural stone are planes along which a fracture can travel.

For daily wear, the combination that works is a protective setting and a stone that does not stand tall off the finger: a bezel or a low-profile halo rather than a high solitaire, and a stone size in proportion to the hand. Taking the ring off for manual work, sport and cleaning removes most of the real risk.

If the ring is intended for constant wear with no thought at all, a lab-grown stone in a bezel is the least demanding version of the choice, and a harder stone would be a fair alternative to consider. Either way the setting should be checked by a jeweller from time to time, as it should on any ring worn daily.

Should I choose 14K gold or platinum for an emerald piece?

Both are available across this collection - 634 designs in 14K gold and 481 in platinum - and the decision is mostly about appearance and weight rather than about the stone. Platinum is a denser metal, so a platinum piece feels heavier than the same design in gold, and it holds a naturally white colour without a surface finish.

In 14K gold, colour is a variant choice on most designs: yellow, white and rose are each offered across more than five hundred designs, so the same setting can be compared in all three. White gold reaches a similar cool white to platinum by way of a rhodium finish, which a jeweller renews periodically rather than once.

Against green, cool metals let the stone dominate and warm metals soften it. Yellow gold reads more traditional with emerald; platinum and white gold read more contemporary; rose gold is a deliberate contrast. There is no correct answer here, and the practical tie-breakers are usually what the wearer already owns and how heavy they like a piece to feel.

How big is a 6mm emerald, and why are sizes given in millimeters?

Millimetres describe the stone's actual dimensions, so they tell you directly how large the stone will look. A 6mm round stone is six millimetres across - roughly the width of a pencil - and that is the number to picture when you are imagining the finished piece.

Carat is a weight, not a size, and weight translates into visible size differently from one gem species to another because they differ in density. Emerald is less dense than several other popular stones, so a given carat weight in emerald tends to present slightly larger than the same weight in a denser gem. That is why millimetres are the more useful figure when comparing designs.

Where a listing does state a total carat weight, it covers every stone in the piece. On a halo or accented design that includes the surrounding stones, so the stated total is not the weight of the centre emerald on its own.

What does 'made to order' mean for an emerald piece?

It means the piece is produced after you order it, built to the specification you select - metal, metal colour, stone size and, for rings, ring size. Every one of the 1,113 pieces in this collection works this way. It is why the variant choices are real options rather than approximations of something already in a case.

The trade-off is time: there is a production window between the order and dispatch, and the current lead time is shown during checkout. If a piece is needed for a particular date, that window is the thing to plan around.

It also puts more weight on sizing. A made-to-order ring is built to the size ordered rather than altered afterwards, and some designs - full eternity bands and closely set stackables especially - are awkward to resize later without disturbing the setting. If a size is uncertain, a necklace, pendant or pair of earrings avoids the question entirely.

Compare /3

Loading...